fusionTrack™ 500
Discover
spryTrack™ 300
Bringing 3D reconstruction
to optical tracking
EN
EN
Bringing 3D reconstruction
to optical tracking
One device. One coordinate system. No synchronization or origin-matching issues.
spryTrack™ 300 is Atracsys optical tracking and 3D reconstruction camera designed to bring 3D capabilities to your navigation platform. Unlock new possibilities with no drawbacks using this all-in-one hardware. Benefit from the best marker-based tracking and real-time 3D sensing features without synchronization or origin-matching issues. Explore the new potential of the spryTrack™ 300.
The spryTrack™ 300 combines high-accuracy, real-time optical tracking of passive and active markers with 3D reconstruction in a single device.
Available in both IR and RGB models, the spryTrack™ 300 uses a dual-camera architecture to deliver precise 6DoF pose marker tracking (x, y, z, α, β, γ).
Both models combine marker tracking and structured-light acquisition, enabling dense 3D surface reconstruction within the same device and coordinate system.
Available as an IR optical tracker or color imaging tracker
Sub-millimetric accuracy: 0.14 mm RMS up to 1.4 m
Three alternative acquisition modes: fiducial tracking at 54 Hz, dense 3D reconstruction up to 54 Hz, and visible-color image acquisition
Simple plug-and-play integration via USB Type-C: for quick setup and ease of use
Atracsys offers a complete ecosystem of solutions, designed to enable higher accuracy and streamline integration: cameras, markers, verification and calibration tools, SDK and a dedicated customer service
Atracsys SDK provide access to data across all processing stages—from raw images and 3D fiducial positions to full marker pose—along with multi-level fault checking for real-time error diagnostics at every step
Tailored evaluations, R&D consultancies and dedicated services to fast-track your development and deployment timeline, step by step
| Size & Weight | 356.5 mm x 60.5 mm x 55 mm |
|---|---|
| Accuracy 1 | 0.14 mm RMS up to 1.4 m |
| Working volume | Starts at 400 mm |
| Measurement rate 2 | 54 Hz |
| Latency 3 | ~25 ms |
| Tracking specs |
|
| Certifications |
|
(1) Based on a single fiducial stepped uniformly throughout the measurement working volume at 20 °C.
(2) Depending on the user’s computer, USB connection and numbers of blobs detected in the pictures.
(3) Tested with a USB connection and in the case of typical IR images with 4 markers including 4 fiducials in the center of the Working Volume and without interference.
(4) Full speed is preserved for 4 markers of 4 fiducials. (i.e. 16 fiducials).
Due to continuous improvements, Atracsys reserves the right to modify the information or specifications without prior notice.
